Key Features 

Classic Plus LD-C-70


- Approved for construction type VB under the IBC and non fire-resistance rated construction under the IRC

- Stable thermal performance 
- R-Value = 4.0 per inch  
- Superior sound control 
- Vapor permeable, support bi-directional drying of assemblies    - Soft, flexible composition maintains an air seal even after seasonal expansion/contraction of building assembly           
- 5% water absorption    
- Superior indoor air quality by blocking air infiltration and mass transfer of moisture that may cause mold


ICYNENE  


Icynene Classic Max open cell 1/2 pound spray foam, together with an unvented attic assembly configuration, can help smother an attic fire in less than a minute! The industry’s most thoroughly fire tested spray foam insulation material can help enhance your reputation and the quality of your homes. 100% water-blown, meaning they use no synthetic blowing agents or ozone depleting substances. The reaction used to create these products generates Carbon Dioxide to expand the foam. Carbon Dioxide has the lowest Global Warming Potential (GWP of 1). Since it is applied as a liquid and expands to fill every cavity, crevice and gap,

"in - su - late"

Protect (something) by interposing material that

prevents the loss of heat or the intrusion of sound

805.845.3999

130 North Calle Cesar Chavez #40, Santa Barbara, CA 93103, USA

Icynene 


Icynene Classic Plus open cell 3/4 pound spray foam is a high R-value (R-4 per inch) open-cell spray foam that achieves R-22 in 2x6 assemblies and R-30 in 2x8 assemblies. Suited for use in residential interior applications, the superior performance of Icynene Classic Plus is ideal for builders in areas requiring a higher R-value to meet the latest building codes.With a high R-value, this low-density open cell spray foam insulation innovation is ideal for use in residences and commercial building type V-B.

Key Features 

Classic Max LD-C-50v2


- Approved for construction types I, II, III, IV, and V

- Stable thermal performance 
- R-Value = 3.7 per inch  
- Superior sound control 
- Vapor permeable, support bi-directional drying of assemblies    - Soft, flexible composition maintains an air seal even after seasonal expansion/contraction of building assembly           
- 5% water absorption    
- Superior indoor air quality by blocking air infiltration and mass transfer of moisture that may cause mold


leEd contributions & nahb approvals


Icynene insulation foam spray products qualify for LEED credits in the categories of Energy & Atmosphere, Innovation & Design, Materials & Resources and Indoor Environmental Quality.  All Icynene products are green approved products according to the National Green Building Standard of the National Association of Home Builders.


architects


Spray Foam is more than just a high R-Value insulation

Designing with spray foam allows an architect to use one product for many purposes: to achieve an air barrier, vapor barrier and provide effective insulation. Spray foam can provide you with a cost-effective building design and energy efficient building performance.  Icynene spray foam insulation can help building owners save more money—up to 40% to 50% in savings—on monthly energy bills.  Icynene spray foam insulation is guaranteed to never settle, shrink, compress, sag, or lose its insulation efficiency. Because spray foam insulation creates an impervious barrier against pollen, pollutants, and dust—and reduces noise penetration up to 80%, spray foam insulation makes a building more comfortable, healthier, and quieter—all contributing factors for the health and well-being of the homes occupants.


proven performance

open and closed cell


Classic (LD-C-50) is the product that made the Icynene name synonymous with superior quality, open-celled, 0.5 lb., light density spray foam insulation. Icynene "Classic" has been used in thousands of residential and commercial projects for over 25 years and is the industry benchmark for quality and innovation by which all other light density insulation products should be judged. They're newest product "Classic Max" has become the most thoroughly tested spray foam insulation on the market and does away with the need for an ignition barrier in an unvented attic space, eliminating additional material and labor expenses. For more information please see below.

Icynene ProSeal is a closed-cell spray foam insulation. A high performance 2 lb.closed-cell spray foam, high R-value(R7 per inch), air impermeable material, increased structural integrity for a home or commercial buildings, built-in vapor retarder (Class II vapor retarder at 1.5") superior cold temperature adhesion to multiple substrates, formulations for all climate zones and altitudes low odor.


 

Key Features 

ProSeal  MD-C-200v3


- Approved for construction types I, II, III, IV, and V

- Stable thermal performance 
- R-Value = 7.0 per inch  
- Class II Vapor Diffusuion Retarder @ 1.5" 
- Rigid, not flexible composition contributes to wall racking strength    - Rejects bulk water          
- Expands 40 times from liquid state    
- Supports indoor air quality by blocking air infiltration and mass transfer of mositure that may cause mold

PROSEAL​


approved ignition and thermal

barrier rating over spray foam


- Meets Life Safety code and LEED points requirements.   

-  Certificate of Compliance – VOC Emissions, passed CAL 1350 “safe for   use in schools and high occupancy buildings.”   

- Passed EPA – VOC and AMQD tests meets emission requirements for all  50 states   

- Complies with the requirements of NSF/ANS1 51 Incidental Food Contact, USDA.

CLASSIC PLUS


ICYNENE  


Icynene ProSeal closed cell 2 pound spray foam is a high-performance, low-VOC closed-cell spray foam insulation product that sets a new benchmark in excellence. Closed-cell spray foam insulation meets the criteria set by FEMA for resisting bulk water, making it ideal for use in zones prone to flooding and moisture.​ With a high R-value (R-7 per inch), its a Class II vapor retarder at 1.5" thickness. You can achieve an R-30 value with 4.3" of Closed cell MD-C-200v3 Icynene spray foam.

CLASSIC MAX


no burn ignition and

thermal barrier


The International Building Code mandates that polyurethane spray foam be separated from the interior of the building by a 15 minute thermal barrier or other approved covering. No Burn Intumescent Coating has passed certified NFPA 286 over closed and open cell for 15 minutes thermal barrier requirement. It complies with the requirements of 2006 IBC Section 803.2.1 & 2009 IBC Section 803.1.2 and Section 2603.9 under Special Approvals for Thermal Barriers over Foam Plastics. This includes the requirement as an ignition barrier per AC 377, Appendix X. No Burn ignition barrier is applied directly to the foam and is a flat white finish. The product is water-based and can double as a prime coat. Painting over the Intumescent Coating is permitted, but it is recommended to use a water-based paint. The Intumescent Coatings cannot be tinted to a color like a paint.